> ## Content Index
> Fetch the complete content index at: https://www.vacubots.com/llms.txt
> Use this file to discover other available public pages before exploring further.

# How to Create and Edit Your Eufy Map
- URL: https://www.vacubots.com/guides/eufy/how-to-create-and-edit-your-eufy-map/
- Published: 2026-10-18T09:16:32.000Z
- Updated: 2026-10-18T09:16:32.000Z
- Description: Save your home’s layout, correct room boundaries and set useful cleaning exclusions.
- Author: J Allen, Editor
- Tags: Anker Eufy, guides, #setup

A good map makes room cleaning easier. Before scheduling the kitchen or blocking a troublesome corner, check that the robot has recorded the rooms and routes it can actually reach.

These instructions focus on current Eufy robot vacuums, including the 2026 Omni S2\. Dock hardware and app options vary.

## How Should You Prepare the Home?

Put the dock in its intended position. Open doors to the rooms you want included, remove loose cords and clear narrow passageways.

Keep the dock in place during mapping. A closed door can leave a room out of the result even when the rest of the map looks complete.

## How Do You Make the First Map?

1. Open the robot in the eufy app.
2. Start the mapping or first-cleaning process offered during setup.
3. Let the robot complete the run without carrying it between rooms.
4. Save or confirm the result when prompted.
5. Review the map before creating room-specific tasks.

Use the map controls in the eufy app to review rooms and boundaries. On the Omni S2, no-go and no-mop areas serve different purposes: one excludes the robot, while the other limits wet cleaning.

**\[PHOTO: The saved map in the eufy app\]**

## Can You Split, Merge or Rename Rooms?

Use the room editor where those controls are offered. Split an open-plan area if you want separate cleaning selections, or merge adjacent sections that belong to one room.

Choose clear names such as Kitchen or Guest bedroom. After saving, select a room on the map and confirm that the highlighted area matches your intention.

If your app does not offer a particular editing control, use the supported room or area tools rather than deleting a usable map to find it.

## What Is the Difference Between a Cleaning Zone and a No-Go Zone?

A cleaning zone selects an area for a task. A no-go zone excludes an area from cleaning. A virtual wall, where offered, creates a boundary line.

Check the active map before adding restrictions. Keep access to the dock open, and use physical protection around hazardous drops; app boundaries are not safety barriers.

**\[PHOTO: The room-editing tools in the eufy app\]**

## What If the Map Is Incomplete?

Check for closed doors, blocked thresholds and the wrong selected floor. Review the app’s options for extending or correcting the map before starting over.

After significant edits, run a small room-cleaning job to check the result before relying on a schedule.