> ## Content Index > Fetch the complete content index at: https://www.vacubots.com/llms.txt > Use this file to discover other available public pages before exploring further. # Maintenance Check: MOVA Z60 Ultra Roller Complete - URL: https://www.vacubots.com/guides/mova/maintenance-check-mova-z60-ultra-roller-complete/ - Published: 2026-10-08T02:36:01.000Z - Updated: 2026-10-09T06:40:48.000Z - Author: J Allen, Editor - Tags: MOVA, Z60 URC, Maintenance ## MOVA Z60 Ultra Roller Complete at a Glance - Suction Power: 28,000 Pa - Mopping System: HydroForce continuously washed roller mop, 12 spray nozzles, 10.08-inch roller - Mop Pressure: 4,100 Pa of downward pressure, 17N - Dock Mop Wash: Up to 176°F hot-water wash - Dock Drying: Hot-air drying - Auto-Empty Bag: 3.2 L, up to 100 days - Navigation: Retractable VersaLift lidar, dual RGB cameras, 3D structured light, 200-plus objects recognized - Brush System: TroboWave DuoBrush, rubber and rubber-bristle rollers - Robot Height: 3.78 inches with lidar retracted - Cleaning Solution: DuoSolution dual-compartment automatic dispensing ## Main Brushes, Side Brush and Wheels (Every 2–3 Days) ### Dual Main Brushes and Brush Compartment Remove wrapped hair and debris from both brushes. Check the ends and clear dirt from the brush compartment. \[Image: Dual main brushes and brush compartment\] ### Side Brush Gear Clear hair and strands from the extending side brush and its gear housing. Check that the brush moves freely. \[Image: Side brush gear\] ### Wheels Remove hair and debris from the main wheels, omnidirectional wheel and caster wheel. Check the axles for wrapped strands. \[Image: Wheels\] ## Water Tanks, Dustbin and Filters (Weekly) ### Dirty-Water Tank Empty after each use to prevent odors. Rinse away residue and clean the interior as needed. \[Image: Dirty-water tank\] ### Clean-Water Tank Check the water level and refill as needed. Rinse away residue and inspect the scale inhibitor. \[Image: Clean-water tank\] ### Internal Dirty-Water Box Remove the robot's dirty-water box, empty any collected water and rinse it with clean water. Dry before reinstalling. \[Image: Internal dirty-water box\] ### Dustbin Remove and empty any remaining debris. Rinse with clean water as needed and dry completely before reinstalling. \[Image: Dustbin\] ### Underneath Dustbin Area Check the suction opening and surrounding compartment for trapped hair, dust and debris. \[Image: Underneath dustbin area\] ### Main Filter Gently tap accumulated dust from the filter to maintain airflow. Rinse with clean water if needed and allow it to dry completely. Do not scrub the filter. \[Image: Main filter\] ### Dirt Funnel Barrier Clear hair and debris from the dirt funnel barrier. Check for buildup that could restrict debris pickup. \[Image: Dirt funnel barrier\] ## Sensors, Dock, Roller Mop and Dust Bag (Monthly) ### Top and Front Sensors Wipe the VersaLift lidar, edge sensor, cameras and 3D laser sensors with a soft, dry cloth. Remove dust and fingerprints. \[Image: Top and front sensors\] ### Bottom Sensors Wipe the cliff and carpet sensors whenever dust or debris is visible. \[Image: Bottom sensors\] ### Charging Contacts Clean the charging contacts on the robot and dock with a soft, dry cloth. Check the dock's signaling area for dust. \[Image: Charging contacts\] ### Washboard and Dock Basin Remove the washboard after the mop-washing cycle finishes. Rinse away residue and clear debris from the basin before reinstalling. \[Image: Washboard and dock basin\] ### Roller Mop Inspect the roller for trapped hair, lint and wear. Remove it for a more thorough cleaning when needed. \[Image: Roller mop\] ### Roller Mop Housing Check the area surrounding the roller for accumulated dirt, hair and damp residue. \[Image: Roller mop housing\] ### Fluffing Roller Remove the fluffing roller by pressing its release clips. Clear trapped fibers and residue before reinstalling. \[Image: Fluffing roller\] ### Mop Cover Check the retractable mop cover for dirt and debris. Clean the edges and mounting points to keep it moving freely. \[Image: Mop cover\] ### Dust Bag Confirm the dust bag is seated correctly and isn't full. Replace it when needed, generally every two to four months. \[Image: Dust bag\] ## Deep Clean (Every 1–3 Months) ### Main Brush Compartment Remove both brushes and thoroughly clean the compartment and brush holders. Watch for packed hair around the ends. \[Image: Main brush compartment\] ### Roller Mop Compartment Remove the roller mop and clean accumulated dirt and damp residue from the housing. Let cleaned components dry before reassembly. \[Image: Roller mop compartment\] ### Roller Mop Slot and Filter Vent Clear hair, lint and debris from the roller slot and filter vent. These areas can accumulate residue from the continuously washed mop. \[Image: Roller mop slot and filter vent\] ### Fluffing Roller Housing Remove the fluffing roller and clean the surrounding compartment. Pay attention to trapped fibers and dried residue near the roller ends. \[Image: Fluffing roller housing\] ### Internal Water System Remove the internal dirty-water box and check its openings for residue or blockages. Rinse and dry the removable box. \[Image: Internal water system\] ### Drain Area With the washboard removed, clear hair, lint and dried residue from the dock's drainage openings. \[Image: Drain area\] ### Dock Ramp Wipe the ramp's ridges and grooves to remove dirt that could interfere with docking. \[Image: Dock ramp\]