Dreame Launches Aqua20 Pro Ultra Roller X Complete With Steam Roller Mop at IFA 2026

Dreame introduced the Aqua20 Pro Ultra Roller X Complete at IFA 2026, adding onboard steam cleaning to its roller-mop robot vacuum lineup.

The new flagship also brings higher suction, farther roller extension, greater obstacle clearance and expanded object recognition compared with the Aqua10 Ultra Roller Complete.

Dreame also announced the LEAPTIC Cube Mini Camera and UK availability for its T Series wet-dry vacuums.

Steam Cleaning Comes To Dreame's Roller Mop

The Aqua20 Pro Ultra Roller X Complete is Dreame's first roller-mop robot vacuum with onboard steam cleaning.

The robot generates steam at temperatures as high as 356 F and releases it through four outlets to loosen dried-on stains before the roller follows with hot-water mopping.

The steam system is built into the robot rather than the dock, allowing the Aqua20 Pro Ultra Roller X Complete to apply steam directly to the floor while cleaning.

That differs from systems such as Samsung's Bespoke Jet Bot Combo, which uses steam inside its Clean Station to sanitize the mop pads after cleaning.

Dreame says the new system achieved a 99.99% bacteria removal rate in third-party SGS testing.

The roller can extend as much as 3.15 inches for edge and corner cleaning, roughly twice the extension distance of the Aqua10 Ultra Roller Complete.

Suction And Threshold Clearance Increase

Maximum suction rises to 40,000 Pa from 30,000 Pa on the Aqua10 Ultra Roller Complete.

Dreame also increased obstacle clearance. The Aqua20 Pro Ultra Roller X Complete can cross single thresholds up to 1.97 inches high and two-stage transitions up to 3.94 inches.

The Aqua10 Ultra Roller Complete was rated for 1.65-inch single thresholds and 3.15-inch two-stage transitions.

The new model retains Dreame's dual HyperStream main-brush design, extending side brush and carpet-protection system that seals the roller when the robot moves onto carpet.

Navigation Recognizes More Objects

The Aqua20 Pro Ultra Roller X Complete combines Dreame's VersaLift navigation system with OmniSight System 4.0 obstacle avoidance.

Dreame says the system can recognize more than 320 types of objects, up from more than 240 on the Aqua10 Ultra Roller Complete.

It can also react to moving objects and recalculate its route while cleaning.

Dreame Introduces LEAPTIC Cube Camera

Dreame also introduced the LEAPTIC Cube Mini Camera.

The 1.97-ounce camera supports 8K video at 30 fps, 4K HDR at 60 fps and 4K slow-motion recording at 120 fps.

It includes a 155-degree ultra-wide lens, electronic stabilization and voice controls through Dreame's "Hi, Moko" assistant.

Battery life is rated at up to 110 minutes, or up to 210 minutes with an optional magnetic battery.

T Series Wet-Dry Vacuums Head To UK

Dreame also confirmed UK rollout plans for the T12 Pro, T14 Pro, T15 Pro Heat, T16 Pro Heat and T16 Pro Steam.

The T16 Pro Heat uses hot-water cleaning at temperatures as high as 194 F and offers up to 70 minutes of runtime.

The T16 Pro Steam adds steam temperatures as high as 392 F.

Pricing And Availability

The Dreame Aqua20 Pro Ultra Roller X Complete will be priced at £1,299 in the UK and is listed as coming soon.

The LEAPTIC Cube will start at £349.

The T Series will start at £279 for the T12 Pro. The T14 Pro will cost £359, T15 Pro Heat £439, T16 Pro Heat £549 and T16 Pro Steam £569.

Dreame has not announced U.S. pricing or availability for the Aqua20 Pro Ultra Roller X Complete.

Images courtesy of Dreame.